Feature:
The fiberglass antenna is designed for wireless access system. Which through optimization design and careful debugging with follow qualities: good standing wave performance,high gain,broad band,big F/B ratio,strong structure,own the good ability of antihunting,waterproof and anticorrosion; Small size,easy installation,the directional diagram will be unacted whether installate on iron tower or roof.
Antenna Specifications:
Model NO: ARF-SP(1920-2170)-15
Frequency Range-MHz: 1920-2170
Bandwidth-MHz: 250
Gain-dBi: 15
Horizontal Bear width:°360
Vertical Bear width: -°5
VSWR: ≤1.5
Input Impedance: -Ω 50
Polarization: Vertical
Maximum Power -W 100
Connector: N-female
Package Dimension:(L X W X H) 160 x 3.5 x 3.5
Package Weight: 0.779g
1 Watt Outdoor Access Point With 2 LAN Ports Specification:
RF: Atheros AR9285 | CPU: AR7240 (400MHz)
Antenna – Default configuration: 8dBi integrated directional antenna (vertical pol.)
Antenna Configuration: 1 * 1 (1 Tx, 1 Rx)
External RF connector: N type male connector – switchable by software
Memory: Flash 8MB / DDR 32MB8MB
Modulation: OFDM: BPSK, QPSK, 16-QAM, 64-QAM / DSSS: DBPSK, DQPSK, CCK
Available Data Rates (Mbps): IEEE 802.11g – 54, 48, 36, 24, 18, 12, 9, 6
RF Frequency: USA (FCC) 2.412GHz – 2.462GHz (Channels 1-11)
Average RF Output Power (± 1.5dB): 802.11n
Receiver Sensitivity: 802.11b
Regulatory Compliance: 1Mbps: ≤ -93dBm
54Mbps: ≤ -73dBm / HT20/MSC0 ≤88dBm / HT40/MSC0 ≤84dBm
Standards: FCC Part 15, CE EN300 328, EN301 489-1/17, EN60950
Web Language: English
Firmware Upgrade Method: Web upgrade via Ethernet or Wireless port / TFTP upgrade via Etherent port
Status Information
Statistics for Wireless and Ethernet
Connection status
System Basic Settings
Device Name APXXXXXX
Country/Domain:
USA FCC
Time NTP: Disable
IP Settings
IP Address assignment (DHCP/Manual): DHCP / 192.168.1.1, DHCP is the default, however when server is not present the unit reverts to 192.168.1.1
RADIUS
Accounting and Authentication: Disable
Basic Wireless Settings
Operation mode (AP / CPE)
AP
AP mode functions
1. SSID
Wireless
2. Hide SSID (enable/disable)
Disable
3. Channel select (1-11)
1
4. Client limitations (0~32)
32
5. Wireless client isolation (enable/disable)
Disable
6. Tx flow control (1~2400*64Kbps)
1687
Client mode functions
1. SSID: Any
Bridge mode
Ap repeater mode
Firmware Specification
Function
Detail
Default setting
Web Language
English
English
Firmware Upgrade Method
Web upgrade via Ethernet or Wireless port / TFTP upgrade via Etherent port
Status
Information
Statistics for Wireless and Ethernet
Connection status
System
Basic Settings
Device Name
APXXXXXX
Country/Domain
USA FCC
Time NTP
Disable
IP Settings
IP Address assignment (DHCP/Manual)
DHCP / 192.168.1.1, DHCP is the default, however when server is not present the unit reverts to 192.168.1.1
RADIUS
Accounting and Authentication
Disable
Wireless
Basic Wireless Settings
Operation mode (AP / CPE)
AP
AP mode functions
1. SSID
Wireless
2. Hide SSID (enable/disable)
Disable
3. Channel select (1-11)
1
4. Client limitations (0~32)
32
5. Wireless client isolation (enable/disable)
Disable
6. Tx flow control (1~2400*64Kbps)
1687
Client mode functions
1. SSID
Any
Bridge mode
Ap repeater mode
– See more at: https://www.latestgadget.com.ph/index.php?route=product/product&product_id=605#sthash.vAD66OTk.dpuf
Firmware Specification
Function
Detail
Default setting
Web Language
English
English
Firmware Upgrade Method
Web upgrade via Ethernet or Wireless port / TFTP upgrade via Etherent port
Status
Information
Statistics for Wireless and Ethernet
Connection status
System
Basic Settings
Device Name
APXXXXXX
Country/Domain
USA FCC
Time NTP
Disable
IP Settings
IP Address assignment (DHCP/Manual)
DHCP / 192.168.1.1, DHCP is the default, however when server is not present the unit reverts to 192.168.1.1
RADIUS
Accounting and Authentication
Disable
Wireless
Basic Wireless Settings
Operation mode (AP / CPE)
AP
AP mode functions
1. SSID
Wireless
2. Hide SSID (enable/disable)
Disable
3. Channel select (1-11)
1
4. Client limitations (0~32)
32
5. Wireless client isolation (enable/disable)
Disable
6. Tx flow control (1~2400*64Kbps)
1687
Client mode functions
1. SSID
Any
Bridge mode
Ap repeater mode
– See more at: https://www.latestgadget.com.ph/index.php?route=product/product&product_id=605#sthash.vAD66OTk.dpuf
Package Include:
1 X Wireless 3G fiberglass repeater antennas
1 X 1 Watt Outdoor Access Point With 2 LAN Ports
There are no reviews yet.